Cessna (F) 172M (Diesel) POH study guide

Reims/Cessna (F) 172M — Technify TAE 125-02-114

Modules
8
Lessons
53
Questions
298

Source POH, Technify TAE 125-02-114

Free lessons

Library

General

  1. Principal Dimensions (locked)
  2. The TAE 125-02-114 EngineFree
  3. Propeller, Fuel and Fluids (locked)
  4. Speeds for Normal OperationFree
  5. The Warning and Caution Light Panel (locked)

Limitations

  1. Weights, Categories and Load Factors (locked)
  2. Airspeed Limitations and MarkingsFree
  3. Powerplant and Altitude Limits (locked)
  4. Engine Temperature and Pressure Limits (locked)
  5. Engine Instrument Markings (locked)
  6. Fuel Grades and Fuel System LimitsFree
  7. Placards (locked)
  8. Utility Category and Diesel Fuel Temperature Limits (locked)

Emergency Procedures

  1. Engine Failure on Take-off and in FlightFree
  2. Airborne Engine Restart (locked)
  3. FADEC Failures (locked)
  4. Fires (locked)
  5. Forced and Precautionary Landings (locked)
  6. Inadvertent IMC and Spiral Dive Recovery (locked)
  7. Inadvertent Icing Encounter (locked)
  8. Electrical System Failures (locked)
  9. Engine Indication Emergencies (locked)
  10. Propeller Overspeed and RPM Fluctuations (locked)

Normal Procedures

  1. Preflight Inspection (locked)
  2. Before Starting and Starting the Engine (locked)
  3. After Start: Backup Battery Test and Warm-up (locked)
  4. Taxiing (locked)
  5. Before Take-off Checks and the FADEC Test (locked)
  6. Take-off (locked)
  7. Climb and Cruise (locked)
  8. Stalls and Spins (locked)
  9. Landing and Balked Landing (locked)
  10. Securing the Airplane and Hot Weather Operation (locked)

Performance

  1. Chart Conditions and Correction Factors (locked)
  2. Take-off PerformanceFree
  3. Climb Performance (locked)
  4. Cruise, Range and Endurance (locked)
  5. Stall SpeedsFree
  6. Landing and Glide Performance (locked)

Weight and Balance

  1. Working the Loading Problem (locked)
  2. Loading Stations and Baggage Limits (locked)

Systems Description

  1. The Fuel System (locked)
  2. The Electrical System (locked)
  3. FADEC and the Engine Master (locked)
  4. The Cooling System and Cabin Heat (locked)
  5. Lighting (locked)
  6. Wing Flaps (locked)
  7. Cabin Equipment and Optional Systems (locked)

Handling, Service and Maintenance

  1. Ground Handling, Mooring and Cleaning (locked)
  2. Aircraft Papers and Identification (locked)
  3. Storage and Inspection Programmes (locked)
  4. Servicing: Tyres, Strut and Engine Oil (locked)
  5. Servicing: Gearbox and Cooling System (locked)